Description
E-DOPE is an electronic display used to clearly display target data. Utilizing E-Paper technology the display is sunlight readable at extreme angles. The display is battery-less, utilizing NFC technology from your iOS or Android device (must have NFC) to update the display. The E-DOPE display is intended for fast-paced competition target shooting where multiple targets are to be engaged under time constraints. The display uses the E-DOPE (iOS & Android), Kestrel Ballistic Link, and BallisticsARC Android applications.
The E-DOPE application allows you to save an indefinite list of stages with multiple targets. This allows the user to pre-save target distances, elevation, and wind holds and load them to the E-DOPE display when needed.
Using the E-DOPE card is easy, simply input all your required data into either the E-DOPE, Kestrel Ballistics Link, or BallisticsARC application. Hold the back of your Android device to the front of the E-DOPE card. You will get a status bar showing the transfer progress and a message stating “Transfer Complete”. On iOS devices you must tap the send button and hold the top edge of the iPhone to the E-Dope card to complete the transfer. Please reference your device’s user manual to familiarize yourself with its NFC functionality.
E-DOPE WORKS WITH iOS AND ANDROID DEVICES.
iOS 13 on iPhone8 and later are required to be used with E-Dope. Most Android handheld devices (tablets excluded) made after 2006 should work as long as they are NFC-enabled.
Dimensions : 2.13″ x 3.37″ x 0.145″
Viewable screen size: 2.9″
IP54 rated: Dust and Water Resistant
Operating temp: -10°F to 130°F
Attachment Method: Hook and Loop supplied
This kit also includes the E-Dope Card Holder: The E-Dope® Card Holder is a sturdy and durable rifle-mounted holder. The E-Dope® Card Holder was designed to conveniently locate your ballistic data in a position that can viewed without breaking your shooting position. It has three fixed positions; stowed forward, stowed rear, and viewable perpendicular to line of bore. The E-Dope® Card is installed by sliding the card (without Velcro ™) into the holder from the top. The body of the holder is made from Nylon 12 and the Picatinny attachment arm is 6061 aluminum with a steel thumb screw for retention. The holder is configurable for right and left-hand shooters by simply swapping sides utilizing the screws (required Allen wrench is included). Simply position the E-Dope® Card Holder on your Picatinny rail and tighten the thumb screw. The pivot joint is indexed with 4 ball spring plunges to maintain its desired position.
